5050,00 zł
brutto · 4105,69 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 35mm |
|---|---|
| Średnica zewnętrzna D | 72mm |
| Szerokość B | 68mm |
| Masa | 1,297kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2,5µm |
|---|---|
| Basic dynamic load rating, axial | 73 000N |
| Basic static load rating, axial | 177 000N |
| Bearing frictional torque |
|---|
| 0,6Nm |
| Bore diameter lower tolerance | -0,005mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Contact angle | 60° |
|---|
| Fatigue load limit, axial | 10 800N |
|---|
| Limiting speed for grease lubrication | 5 800 1/min |
|---|
| Marketing category | XL |
|---|
| Mass moment of inertia | 3,02kg*cm² |
|---|
| Maximum diameter of housing | 62mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 45mm |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for axial locking | AM35/58 |
|---|
| Recommended INA precision locknut for radial locking | ZMA35/58 |
|---|
| Required locknut force axial | 10 770N |
|---|
| Rib diameter inner ring | 52mm |
|---|
| Rigidity axial | 1 600N/µm |
|---|
| Thermally safe operating speed | 3 800 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 40Nm |
|---|
| Tilting rigidity | 900Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,5mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Number of bearings | 2AP |
|---|
| Sealing | 2Z |
|---|
