4121,50 zł
brutto · 3350,81 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 30mm |
|---|---|
| Średnica zewnętrzna D | 62mm |
| Szerokość B | 56mm |
| Masa | 0,799kg |
| Temperatura pracy | -30…120°C |
| Axial runout | 2,5µm |
|---|---|
| Basic dynamic load rating, axial | 52 000N |
| Basic static load rating, axial |
| Bearing frictional torque | 0,75Nm |
|---|
| Bore diameter lower tolerance | -0,005mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Contact angle | 60° |
|---|
| Fatigue load limit, axial | 7 700N |
|---|
| Limiting speed for grease lubrication | 5 0001/min |
|---|
| Marketing category | XL |
|---|
| Mass moment of inertia | 1,46kg*cm² |
|---|
| Maximum diameter of housing | 53mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 40mm |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for axial locking | AM30 |
|---|
| Recommended INA precision locknut for radial locking | ZMA30/52 |
|---|
| Required locknut force axial | 9 947N |
|---|
| Rib diameter inner ring | 45,5mm |
|---|
| Rigidity axial | 1 500N/µm |
|---|
| Thermally safe operating speed | 2 2001/min |
|---|
| Tightening torque for the recommended INA precision locknut | 32Nm |
|---|
| Tilting rigidity | 620Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,5mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Number of bearings | 2AP |
|---|
| Sealing | 2RS |
|---|
