17 813,00 zł
brutto · 14 482,11 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 90mm |
|---|---|
| Średnica zewnętrzna D | 190mm |
| Szerokość B | 55mm |
| Masa | 7,806kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 3µm |
|---|---|
| Basic dynamic load rating, axial | 149 000N |
| Basic static load rating, axial | 395 000N |
| Bearing frictional torque |
|---|
| 2,3Nm |
| Bore diameter lower tolerance | -0,008mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Connection thread for lubrication | M6 |
|---|
| Contact angle | 60° |
|---|
| Distance of extraction slot | 45mm |
|---|
| Fatigue load limit, axial | 21 900N |
|---|
| Fixing holes diameter | 11mm |
|---|
| Limiting speed for grease lubrication | 3 500 1/min |
|---|
| Marketing category | XL |
|---|
| Mass moment of inertia | 59,9kg*cm² |
|---|
| Maximum diameter of housing | 138mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum diameter shaft | 116mm |
|---|
| Number of holes in adjacent construction | 8 |
|---|
| Outside diameter lower tolerance | -0,015mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter fixing holes | 165mm |
|---|
| Pitch quantity of fixing holes | 8 |
|---|
| Pitch separation angle of holes in adjacent construction | 45° |
|---|
| Pitch separation angle of fixing holes | 45° |
|---|
| Position tolerance of bore in the housing | 0,2mm |
|---|
| Recommended INA precision locknut for axial locking | AM90 |
|---|
| Recommended INA precision locknut for radial locking | ZMA90/130 |
|---|
| Required locknut force axial | 22 731N |
|---|
| Rib diameter inner ring | 120mm |
|---|
| Rigidity axial | 1 700N/µm |
|---|
| Size of fixing screws | M10 |
|---|
| Thermally safe operating speed | 2 300 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 200Nm |
|---|
| Tilting rigidity | 4 400Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width of extraction slot | 3mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2Z |
|---|
