4678,60 zł
brutto · 3803,74 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 40mm |
|---|---|
| Średnica zewnętrzna D | 115mm |
| Szerokość B | 46mm |
| Masa | 2,539kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 2,5µm |
|---|---|
| Basic dynamic load rating, axial | 79 000N |
| Basic static load rating, axial | 149 000N |
| Bearing frictional torque | 1,3Nm |
|---|
| Bore diameter lower tolerance | -0,005mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Connection thread for lubrication | M6 |
|---|
| Contact angle | 60° |
|---|
| Distance of extraction slot | 36mm |
|---|
| Fatigue load limit, axial | 9 100N |
|---|
| Fixing holes diameter | 8,8mm |
|---|
| Limiting speed for grease lubrication | 3 500 1/min |
|---|
| Marketing category | XL |
|---|
| Mass moment of inertia | 5,5kg*cm² |
|---|
| Maximum diameter of housing | 80mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum diameter shaft | 56mm |
|---|
| Number of holes in adjacent construction | 12 |
|---|
| Outside diameter lower tolerance | -0,01mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter fixing holes | 94mm |
|---|
| Pitch quantity of fixing holes | 12 |
|---|
| Pitch separation angle of holes in adjacent construction | 30° |
|---|
| Pitch separation angle of fixing holes | 30° |
|---|
| Position tolerance of bore in the housing | 0,2mm |
|---|
| Recommended INA precision locknut for axial locking | AM40 |
|---|
| Recommended INA precision locknut for radial locking | ZMA40/62 |
|---|
| Required locknut force axial | 25 185N |
|---|
| Rib diameter inner ring | 65mm |
|---|
| Rigidity axial | 1 200N/µm |
|---|
| Size of fixing screws | M8 |
|---|
| Thermally safe operating speed | 1 600 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 110Nm |
|---|
| Tilting rigidity | 750Nm/mrad |
|---|
| Tolerance class | Standard |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width of extraction slot | 3mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
