1268,20 zł
brutto · 1031,06 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 17mm |
|---|---|
| Średnica zewnętrzna D | 62mm |
| Szerokość B | 25mm |
| Masa | 0,452kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 5µm |
|---|---|
| Basic dynamic load rating, axial | 18 900N |
| Basic static load rating, axial | 31 500N |
| Bearing frictional torque |
|---|
| 0,24Nm |
| Bore diameter lower tolerance | -0,01mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Connection thread for lubrication | M6 |
|---|
| Contact angle | 60° |
|---|
| Distance of extraction slot | 17mm |
|---|
| Fatigue load limit, axial | 1 440N |
|---|
| Fixing holes diameter | 6,8mm |
|---|
| Limiting speed for grease lubrication | 7 600 1/min |
|---|
| Mass moment of inertia | 0,132kg*cm² |
|---|
| Maximum diameter of housing | 37mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 23mm |
|---|
| Number of holes in adjacent construction | 3 |
|---|
| Outside diameter lower tolerance | -0,013mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch circle diameter fixing holes | 48mm |
|---|
| Pitch quantity of fixing holes | 6 |
|---|
| Pitch separation angle of holes in adjacent construction | 120° |
|---|
| Pitch separation angle of fixing holes | 60° |
|---|
| Position tolerance of bore in the housing | 0,1mm |
|---|
| Recommended INA precision locknut for axial locking | AM17 |
|---|
| Recommended INA precision locknut for radial locking | ZM17 |
|---|
| Required locknut force axial | 7 514N |
|---|
| Rib diameter inner ring | 30mm |
|---|
| Rigidity axial | 450N/µm |
|---|
| Size of fixing screws | M6 |
|---|
| Thermally safe operating speed | 3 300 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 15Nm |
|---|
| Tilting rigidity | 80Nm/mrad |
|---|
| Tolerance class | PE |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width of extraction slot | 3mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
