12 667,90 zł
brutto · 10 299,11 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 70mm |
|---|---|
| Średnica zewnętrzna D | 160mm |
| Obciążenie dynamiczne C | 56 000N |
| Obciążenie statyczne C₀ | 119 000N |
| Masa | 4,87kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 201 000N |
| Basic static load rating, axial | 630 000N |
|---|
| Bearing friction torque | 4,8Nm |
|---|
| Diameter lubrication hole | 6mm |
|---|
| Distance to lubrication hole | 12,5mm |
|---|
| Division (screwing holes) | 30° |
|---|
| Fatigue load limit, axial | 58 000N |
|---|
| Fatigue load limit, radial | 16 100N |
|---|
| Height outer ring over wave washer | 51mm |
|---|
| Hight | 82mm |
|---|
| Limiting speed for grease lubrication | 800 1/min |
|---|
| Limiting speed for oil lubrication | 2 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA70/110 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM70 |
|---|
| Mass moment of inertia | 62,2kg*cm² |
|---|
| Maximum diameter of housing shoulder | 116mm |
|---|
| Minimum diameter shaft shoulder | 100mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Pitch circle diameter (holes) | 133mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Required locknut force | 46 786N |
|---|
| Rigidity axial | 5 800N/µm |
|---|
| Rip diameter shaft washer | 115mm |
|---|
| Screw size | M10 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 330Nm |
|---|
| Tilting stiffness | 6 000Nm/mrad |
|---|
| Width inner ring | 17,5mm |
|---|
| Width, outer ring | 22,5mm |
|---|
