8261,10 zł
brutto · 6716,34 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 55mm |
|---|---|
| Średnica zewnętrzna D | 145mm |
| Obciążenie dynamiczne C | 44 000N |
| Obciążenie statyczne C₀ | 98 000N |
| Masa | 4,519kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 177 000N |
| Basic static load rating, axial | 500 000N |
|---|
| Bearing friction torque | 4Nm |
|---|
| Diameter lubrication hole | 6mm |
|---|
| Distance to lubrication hole | 12,5mm |
|---|
| Division (screwing holes) | 30° |
|---|
| Fatigue load limit, axial | 46 500N |
|---|
| Fatigue load limit, radial | 13 800N |
|---|
| Heeldiameter wave washer long | 80mm |
|---|
| Height outer ring over wave washer | 72mm |
|---|
| Hight | 103mm |
|---|
| Limiting speed for grease lubrication | 1 000 1/min |
|---|
| Limiting speed for oil lubrication | 2 900 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA55/98 |
|---|
| Locknut 2 | AM55 |
|---|
| Mass moment of inertia | 43kg*cm² |
|---|
| Maximum diameter of housing shoulder | 101mm |
|---|
| Minimum diameter shaft shoulder | 78mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Outside diameter wave washer long | 98mm |
|---|
| Pitch circle diameter (holes) | 118mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Preload force axial | 39 807N |
|---|
| Rigidity axial | 4 900N/µm |
|---|
| Rip diameter shaft washer | 100mm |
|---|
| Screw size | M10 |
|---|
| Sealing ring | 80X100X10 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 220Nm |
|---|
| Tilting stiffness | 3 600Nm/mrad |
|---|
| Width heel wave washer long | 18mm |
|---|
| Width, wave washer | 17,5mm |
|---|
| Width, outer ring | 22,5mm |
|---|
| Width wave washer long | 38,5mm |
|---|
| Type of wave washer | L |
|---|
