3877,00 zł
brutto · 3152,03 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 40mm |
|---|---|
| Średnica zewnętrzna D | 100mm |
| Obciążenie dynamiczne C | 27 500N |
| Obciążenie statyczne C₀ | 53 000N |
| Masa | 1,219kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 59 000N |
| Basic static load rating, axial | 163 000N |
|---|
| Bearing friction torque | 1Nm |
|---|
| Diameter lubrication hole | 3,2mm |
|---|
| Distance to lubrication hole | 10mm |
|---|
| Division (screwing holes) | 45° |
|---|
| Fatigue load limit, axial | 14 200N |
|---|
| Fatigue load limit, radial | 7 600N |
|---|
| Height outer ring over wave washer | 35mm |
|---|
| Hight | 54mm |
|---|
| Limiting speed for grease lubrication | 1 600 1/min |
|---|
| Limiting speed for oil lubrication | 4 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA40/62 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM40 |
|---|
| Mass moment of inertia | 3,78kg*cm² |
|---|
| Maximum diameter of housing shoulder | 66mm |
|---|
| Minimum diameter shaft shoulder | 55mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 8 |
|---|
| Number of screws | 8 |
|---|
| Pitch circle diameter (holes) | 80mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Required locknut force | 14 240N |
|---|
| Rigidity axial | 2 800N/µm |
|---|
| Rip diameter shaft washer | 65mm |
|---|
| Screw size | M8 |
|---|
| Split | 45° |
|---|
| Tightening torque nut | 55Nm |
|---|
| Tilting stiffness | 1 030Nm/mrad |
|---|
| Width inner ring | 11mm |
|---|
| Width, outer ring | 18mm |
|---|
