4877,90 zł
brutto · 3965,77 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 30mm |
|---|---|
| Średnica zewnętrzna D | 105mm |
| Obciążenie dynamiczne C | 26 000N |
| Obciążenie statyczne C₀ | 47 000N |
| Masa | 1,98kg |
| Koszyk | TV |
| Temperatura pracy | -30…20 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 107 000N |
| Basic static load rating, axial | 265 000N |
|---|
| Bearing friction torque | 2,1Nm |
|---|
| Diameter lubrication hole | 3,2mm |
|---|
| Distance to lubrication hole | 10mm |
|---|
| Division (screwing holes) | 30° |
|---|
| Fatigue load limit, axial | 22 900N |
|---|
| Fatigue load limit, radial | 6 800N |
|---|
| Heeldiameter wave washer long | 52mm |
|---|
| Height outer ring over wave washer | 57mm |
|---|
| Hight | 82mm |
|---|
| Limiting speed for grease lubrication | 1 300 1/min |
|---|
| Limiting speed for oil lubrication | 4 400 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA30/65 |
|---|
| Locknut 2 | AM30 |
|---|
| Mass moment of inertia | 7,43kg*cm² |
|---|
| Maximum diameter of housing shoulder | 69mm |
|---|
| Minimum diameter shaft shoulder | 50mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Outside diameter wave washer long | 66mm |
|---|
| Pitch circle diameter (holes) | 85mm |
|---|
| Position bore in the housing | 0,2mm |
|---|
| Preload force axial | 24 287N |
|---|
| Rigidity axial | 3 300N/µm |
|---|
| Rip diameter shaft washer | 68mm |
|---|
| Screw size | M8 |
|---|
| Sealing ring | 52X68X8 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 75Nm |
|---|
| Tilting stiffness | 1 100Nm/mrad |
|---|
| Width heel wave washer long | 13mm |
|---|
| Width, wave washer | 14mm |
|---|
| Width, outer ring | 18mm |
|---|
| Width wave washer long | 30mm |
|---|
| Type of wave washer | L |
|---|
