75.940,60 PLN
Axial/radial bearings, double direction, screw mounting, with integrated angular measuring system
| Class description short | Axial/radial roller bearing |
| Mass netto | 44.92 kg |
| Operating temperature min. | -30.0 °C |
| Operating temperature max. | 120.0 °C |
| Basic dynamic load rating, radial | 265000.0 N |
| Basic static load rating, radial | 880000.0 N |
| Limiting speed | 150.0 1/min |
| REACH | REACH conform |
| RoHS | RoHS compliant |
| Axial rigidity of rolling element set | 43000.0 N/µm |
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 6.0 µm |
| Axial rigidity of bearing position | 24000.0 N/µm |
| Basic dynamic load rating, axial | 290000.0 N |
| Basic static load rating, axial | 2550000.0 N |
| Bearing friction torque at 5 1/min | 25.0 Nm |
| Bore diameter | 460.0 mm |
| Bore diameter lower tolerance | -0.023 mm |
| Bore diameter upper tolerance | 0.0 mm |
| Brand | INA |
| Counterbore depth of fixing holes | 8.2 mm |
| Counterbore diameter of fixing holes | 15.0 mm |
| Fixing holes diameter inner ring | 9.3 mm |
| Fixing holes diameter outer ring | 9.3 mm |
| Height contact face outer ring | 46.0 mm |
| Height contact face outerring H1 lower tolerance | -0.06 mm |
| Height contact face outerring H1 upper tolerance | 0.06 mm |
| Height contact face outer ring | 24.0 mm |
| Height contact face outerring H2 lower tolerance | -0.03 mm |
| Height contact face outerring H2 upper tolerance | 0.03 mm |
| Height | 70.0 mm |
| Height shaft washer | 19.0 mm |
| Angular measuring system integrated | M |
| Maximum diameter inner ring | 560.9 mm |
| Outside diameter | 600.0 mm |
| Outside diameter lower tolerance | -0.028 mm |
| Outside diameter upper tolerance | 0.0 mm |
| PFAS | nein |
| Pitch quantity | 48.0 |
| Pitch separation angle | 7.5 ° |
| Pitch circle diameter fixing holes in inner ring | 482.0 mm |
| Pitch circle diameter fixing holes in outer ring | 580.0 mm |
| Quantity of fixing holes inner ring | 46.0 |
| Quantity of fixing holes outer ring | 45.0 |
| Quantity of retaining screws | 2.0 |
| Quantity of threaded extraction hole | 3.0 |
| Radial rigidity of rolling element set | 17000.0 N/µm |
| Radial rigidity of bearing position | 9100.0 N/µm |
| Diameter of dimensional scale on shaft locating washer | 557.6 mm |
| Screw tightening torque | 34.0 Nm |
| Threaded extraction hole | M12 |
| Tilting rigidity of rolling element set | 1543000.0 Nm/mrad |
| Tilting rigidity of bearing position | 686000.0 Nm/mrad |
| Width of outer ring | 22.0 mm |
