62 842,50 zł
brutto · 51 091,46 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 395mm |
|---|---|
| Średnica zewnętrzna D | 525mm |
| Obciążenie dynamiczne C | 200 000N |
| Obciążenie statyczne C₀ | 640 000N |
| Prędkość graniczna | 200 1/min |
| Masa | 32,055kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 37 000N/µm |
|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 6µm |
|---|
| Axial rigidity of bearing position | 19 800N/µm |
|---|
| Basic dynamic load rating, axial | 265 000N |
|---|
| Basic static load rating, axial | 2 190 000N |
|---|
| Bearing friction torque at 5 1/min | 19Nm |
|---|
| Bore diameter lower tolerance | -0,023mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Counterbore depth of fixing holes | 8,2mm |
|---|
| Counterbore diameter of fixing holes | 15mm |
|---|
| Fixing holes diameter inner ring | 9,3mm |
|---|
| Fixing holes diameter outer ring | 9,3mm |
|---|
| Height contact face outer ring | 42,5mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,05mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,05mm |
|---|
| Height contact face outer ring | 22,5mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,025mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,025mm |
|---|
| Height | 65mm |
|---|
| Height shaft washer | 17,5mm |
|---|
| Angular measuring system integrated | M |
|---|
| Maximum diameter inner ring | 487,7mm |
|---|
| Outside diameter lower tolerance | -0,028mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 415mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 505mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 13 000N/µm |
|---|
| Radial rigidity of bearing position | 8 100N/µm |
|---|
| Diameter of dimensional scale on shaft locating washer | 485,02mm |
|---|
| Screw tightening torque | 34Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 1 002 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 448 000Nm/mrad |
|---|
| Width of outer ring | 20mm |
|---|
