28 503,60 zł
brutto · 23 173,66 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 150mm |
|---|---|
| Średnica zewnętrzna D | 240mm |
| Obciążenie dynamiczne C | 74 000N |
| Obciążenie statyczne C₀ | 146 000N |
| Prędkość graniczna | 800 1/min |
| Masa | 5,5kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 12 000N/µm |
|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 3µm |
|---|
| Axial rigidity of bearing position | 7 600N/µm |
|---|
| Basic dynamic load rating, axial | 128 000N |
|---|
| Basic static load rating, axial | 650 000N |
|---|
| Bearing friction torque at 5 1/min | 4Nm |
|---|
| Bore diameter lower tolerance | -0,013mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Counterbore depth of fixing holes | 6,2mm |
|---|
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Height contact face outer ring | 27mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,03mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,03mm |
|---|
| Height contact face outer ring | 14mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,02mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,02mm |
|---|
| Height | 41mm |
|---|
| Height shaft washer | 10mm |
|---|
| Angular measuring system integrated | M |
|---|
| Maximum diameter inner ring | 214,5mm |
|---|
| Outside diameter lower tolerance | -0,015mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 36 |
|---|
| Pitch separation angle | 10° |
|---|
| Pitch circle diameter fixing holes in inner ring | 165mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 225mm |
|---|
| Quantity of fixing holes inner ring | 34 |
|---|
| Quantity of fixing holes outer ring | 33 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 6 500N/µm |
|---|
| Radial rigidity of bearing position | 4 480N/µm |
|---|
| Diameter of dimensional scale on shaft locating washer | 213,82mm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 61 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 30 300Nm/mrad |
|---|
| Width of outer ring | 12mm |
|---|
