389,80 zł
brutto · 316,91 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Obciążenie dynamiczne C | 24 000N |
|---|---|
| Obciążenie statyczne C₀ | 9 100N |
| Masa | 0,114kg |
| Temperatura pracy | -10…80°C |
| Ball diameter | 22,2mm |
|---|---|
| Bore diameter bearing, lower tolerance | 0mm |
| Bore diameter bearing, tolerance | H7 |
| Bore diameter bearing, upper tolerance |
| Bore diameter bearing | 12mm |
|---|
| Clampable | Not clampable |
|---|
| Distance drilling with/shaft start | 16mm |
|---|
| Edge Spacing | 0,3mm |
|---|
| Maintenance | Maintenance free |
|---|
| Mounting | Internal thread |
|---|
| Lubrication nipple | Cannot be relubricated |
|---|
| Outer eye diameter | 33mm |
|---|
| Outer flange diameter inner ring | 15,4mm |
|---|
| Outside diameter bearing | 26mm |
|---|
| Radial Clearance | 0,005 -0,045 |
|---|
| Radial clearance, maximum | 0,045mm |
|---|
| Radial clearance, minimum | 0,005mm |
|---|
| Shank Length Internal thread head | 50mm |
|---|
| Shank diameter | 17,5mm |
|---|
| Shank diameter, large | 22mm |
|---|
| Slotted | No |
|---|
| Thread length Internal thread | 18mm |
|---|
| Thread Pitch | Right-hand thread |
|---|
| Thread size | M12 |
|---|
| Tilt angle | 13° |
|---|
| Total length internal thread head | 66,5mm |
|---|
| Width Across Flat | 19mm |
|---|
| Width inner ring | 16mm |
|---|
| Width inner ring, lower tolerance | 0mm |
|---|
| Width inner ring, upper tolerance | 0,012mm |
|---|
| Width of the rod end | 12mm |
|---|
| Sealing | Without |
|---|
| Length rod end shank | 6,5mm |
|---|
