1170,80 zł
brutto · 951,87 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 12mm |
|---|---|
| Średnica zewnętrzna D | 42mm |
| Szerokość B | 25mm |
| Masa | 0,197kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 5µm |
|---|---|
| Basic dynamic load rating, axial | 17 100N |
| Basic static load rating, axial | 25 000N |
| Bearing frictional torque |
|---|
| 0,16Nm |
| Bore diameter lower tolerance | -0,01mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Contact angle | 60° |
|---|
| Fatigue load limit, axial | 1 140N |
|---|
| Limiting speed for grease lubrication | 9 200 1/min |
|---|
| Mass moment of inertia | 0,068kg*cm² |
|---|
| Maximum diameter of housing | 33mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 16mm |
|---|
| Outside diameter lower tolerance | -0,011mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for radial locking | ZM12 |
|---|
| Required locknut force axial | 5 307N |
|---|
| Rib diameter inner ring | 25mm |
|---|
| Rigidity axial | 375N/µm |
|---|
| Thermally safe operating speed | 3 800 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 8Nm |
|---|
| Tilting rigidity | 50Nm/mrad |
|---|
| Tolerance class | PE |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
