3247,40 zł
brutto · 2640,16 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 30mm |
|---|---|
| Średnica zewnętrzna D | 80mm |
| Obciążenie dynamiczne C | 24 300N |
| Obciążenie statyczne C₀ | 41 500N |
| Masa | 0,815kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 39 000N |
| Basic static load rating, axial | 101 000N |
|---|
| Bearing friction torque | 0,65Nm |
|---|
| Diameter lubrication hole | 3,2mm |
|---|
| Distance to lubrication hole | 10mm |
|---|
| Division (screwing holes) | 30° |
|---|
| Fatigue load limit, axial | 8 500N |
|---|
| Fatigue load limit, radial | 6 000N |
|---|
| Heeldiameter wave washer long | 40mm |
|---|
| Height outer ring over wave washer | 48mm |
|---|
| Hight | 65mm |
|---|
| Limiting speed for grease lubrication | 1 800 1/min |
|---|
| Limiting speed for oil lubrication | 5 500 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA30/52 |
|---|
| Locknut 2 | AM30 |
|---|
| Mass moment of inertia | 1,7kg*cm² |
|---|
| Maximum diameter of housing shoulder | 53mm |
|---|
| Minimum diameter shaft shoulder | 38mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Outside diameter wave washer long | 50mm |
|---|
| Pitch circle diameter (holes) | 63mm |
|---|
| Position bore in the housing | 0,1mm |
|---|
| Preload force axial | 10 662N |
|---|
| Rigidity axial | 2 200N/µm |
|---|
| Rip diameter shaft washer | 52mm |
|---|
| Screw size | M6 |
|---|
| Sealing ring | 40X52X7 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 32Nm |
|---|
| Tilting stiffness | 520Nm/mrad |
|---|
| Width heel wave washer long | 13mm |
|---|
| Width, wave washer | 10mm |
|---|
| Width, outer ring | 18mm |
|---|
| Width wave washer long | 25mm |
|---|
| Type of wave washer | L |
|---|
