2717,50 zł
brutto · 2209,35 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 20mm |
|---|---|
| Średnica zewnętrzna D | 68mm |
| Obciążenie dynamiczne C | 14 900N |
| Obciążenie statyczne C₀ | 22 400N |
| Masa | 0,534kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 33 500N |
| Basic static load rating, axial | 76 000N |
|---|
| Bearing friction torque | 0,5Nm |
|---|
| Diameter lubrication hole | 3,2mm |
|---|
| Distance to lubrication hole | 8mm |
|---|
| Division (screwing holes) | 45° |
|---|
| Fatigue load limit, axial | 6 400N |
|---|
| Fatigue load limit, radial | 3 400N |
|---|
| Heeldiameter wave washer long | 30mm |
|---|
| Height outer ring over wave washer | 43mm |
|---|
| Hight | 60mm |
|---|
| Limiting speed for grease lubrication | 2 000 1/min |
|---|
| Limiting speed for oil lubrication | 7 000 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA20/38 |
|---|
| Locknut 2 | AM20 |
|---|
| Mass moment of inertia | 0,683kg*cm² |
|---|
| Maximum diameter of housing shoulder | 43mm |
|---|
| Minimum diameter shaft shoulder | 28mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 8 |
|---|
| Number of screws | 8 |
|---|
| Outside diameter wave washer long | 40mm |
|---|
| Pitch circle diameter (holes) | 53mm |
|---|
| Position bore in the housing | 0,1mm |
|---|
| Preload force axial | 8 972N |
|---|
| Rigidity axial | 1 800N/µm |
|---|
| Rip diameter shaft washer | 42mm |
|---|
| Screw size | M6 |
|---|
| Sealing ring | 30X42X7 |
|---|
| Split | 45° |
|---|
| Tightening torque nut | 18Nm |
|---|
| Tilting stiffness | 230Nm/mrad |
|---|
| Width heel wave washer long | 12mm |
|---|
| Width, wave washer | 10mm |
|---|
| Width, outer ring | 14mm |
|---|
| Width wave washer long | 24mm |
|---|
| Type of wave washer | L |
|---|
