89 516,50 zł
brutto · 72 777,64 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 580mm |
|---|---|
| Średnica zewnętrzna D | 750mm |
| Obciążenie dynamiczne C | 255 000N |
| Obciążenie statyczne C₀ | 820 000N |
| Prędkość graniczna | 80 1/min |
| Masa | 85,2kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 41 800N/µm |
|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 10µm |
|---|
| Axial rigidity of bearing position | 23 800N/µm |
|---|
| Basic dynamic load rating, axial | 580 000N |
|---|
| Basic static load rating, axial | 4 450 000N |
|---|
| Bearing friction torque at 5 1/min | 60Nm |
|---|
| Bore diameter lower tolerance | -0,025mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Counterbore depth of fixing holes | 11mm |
|---|
| Counterbore diameter of fixing holes | 18mm |
|---|
| Fixing holes diameter inner ring | 11,4mm |
|---|
| Fixing holes diameter outer ring | 11,4mm |
|---|
| Height contact face outer ring | 60mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,25mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,25mm |
|---|
| Height contact face outer ring | 30mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,25mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,25mm |
|---|
| Height | 90mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 700mm |
|---|
| Outside diameter lower tolerance | -0,035mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 610mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 720mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 42 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 6 |
|---|
| Radial rigidity of rolling element set | 12 500N/µm |
|---|
| Radial rigidity of bearing position | 11 600N/µm |
|---|
| Screw tightening torque | 68Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 1 960 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 1 176 000Nm/mrad |
|---|
| Width of outer ring | 30mm |
|---|
