19 196,70 zł
brutto · 15 607,07 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 180mm |
|---|---|
| Średnica zewnętrzna D | 280mm |
| Obciążenie dynamiczne C | 100 000N |
| Obciążenie statyczne C₀ | 200 000N |
| Prędkość graniczna | 600 1/min |
| Masa | 6,95kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 13 500N/µm |
|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 4µm |
|---|
| Axial rigidity of bearing position | 9 400N/µm |
|---|
| Basic dynamic load rating, axial | 134 000N |
|---|
| Basic static load rating, axial | 730 000N |
|---|
| Bearing friction torque at 5 1/min | 5Nm |
|---|
| Bore diameter lower tolerance | -0,013mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Counterbore depth of fixing holes | 6,2mm |
|---|
| Counterbore diameter of fixing holes | 11mm |
|---|
| Fixing holes diameter inner ring | 7mm |
|---|
| Fixing holes diameter outer ring | 7mm |
|---|
| Height contact face outer ring | 29mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,03mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,03mm |
|---|
| Height contact face outer ring | 14mm |
|---|
| Height contact face outerring H2 lower tolerance | -0,025mm |
|---|
| Height contact face outerring H2 upper tolerance | 0,025mm |
|---|
| Height | 43mm |
|---|
| Angular measuring system integrated | No |
|---|
| Marketing category | XL |
|---|
| Maximum diameter inner ring | 245,1mm |
|---|
| Outside diameter lower tolerance | -0,018mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 194mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 260mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 5 300N/µm |
|---|
| Radial rigidity of bearing position | 5 000N/µm |
|---|
| Screw tightening torque | 14Nm |
|---|
| Threaded extraction hole | M8 |
|---|
| Tilting rigidity of rolling element set | 88 500Nm/mrad |
|---|
| Tilting rigidity of bearing position | 46 000Nm/mrad |
|---|
| Width of outer ring | 15mm |
|---|
