238,20 zł
brutto · 193,66 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Obciążenie dynamiczne C | 21 400N |
|---|---|
| Obciążenie statyczne C₀ | 45 300N |
| Masa | 0,246kg |
| Temperatura pracy | -60…250°C |
| Ball diameter | 28,575mm |
|---|---|
| Bore diameter bearing, lower tolerance | 0mm |
| Bore diameter bearing, tolerance | H7 |
| Bore diameter bearing, upper tolerance |
| Bore diameter bearing | 16mm |
|---|
| Clampable | Not clampable |
|---|
| Distance drilling with/shaft start | 23mm |
|---|
| Edge Spacing | 0,3mm |
|---|
| Maintenance | Maintenance required |
|---|
| Mounting | Internal thread |
|---|
| Lubrication nipple | DIN71412-AS6 (tapered grease nipple) |
|---|
| Outer eye diameter | 42mm |
|---|
| Outer flange diameter inner ring | 19,3mm |
|---|
| Outside diameter bearing | 32mm |
|---|
| Radial Clearance | 0 -0,035 |
|---|
| Radial clearance, maximum | 0,035mm |
|---|
| Radial clearance, minimum | 0mm |
|---|
| Shank Length Internal thread head | 64mm |
|---|
| Shank diameter | 22mm |
|---|
| Shank diameter, large | 28mm |
|---|
| Slotted | No |
|---|
| Thread length Internal thread | 28mm |
|---|
| Thread Pitch | Right-hand thread |
|---|
| Thread size | M16 |
|---|
| Tilt angle | 15° |
|---|
| Total length internal thread head | 85mm |
|---|
| Width Across Flat | 22mm |
|---|
| Width inner ring | 21mm |
|---|
| Width inner ring, lower tolerance | -0,12mm |
|---|
| Width inner ring, upper tolerance | 0mm |
|---|
| Width of the rod end | 15mm |
|---|
| Sealing | Without |
|---|
| Length rod end shank | 8mm |
|---|
