122,20 zł
brutto · 99,35 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Obciążenie dynamiczne C | 10 000N |
|---|---|
| Obciążenie statyczne C₀ | 18 500N |
| Masa | 79,567g |
| Temperatura pracy | -60…250°C |
| Ball diameter | 19,05mm |
|---|---|
| Bore diameter bearing, lower tolerance | 0mm |
| Bore diameter bearing, tolerance | H7 |
| Bore diameter bearing, upper tolerance |
| Bore diameter bearing | 10mm |
|---|
| Clampable | Not clampable |
|---|
| Distance drilling with/shaft start | 15mm |
|---|
| Edge Spacing | 0,3mm |
|---|
| Maintenance | Maintenance required |
|---|
| Mounting | Internal thread |
|---|
| Lubrication nipple | DIN71412-AS6 (tapered grease nipple) |
|---|
| Outer eye diameter | 28mm |
|---|
| Outer flange diameter inner ring | 12,9mm |
|---|
| Outside diameter bearing | 22mm |
|---|
| Radial Clearance | 0 -0,035 |
|---|
| Radial clearance, maximum | 0,035mm |
|---|
| Radial clearance, minimum | 0mm |
|---|
| Shank Length Internal thread head | 43mm |
|---|
| Shank diameter | 15mm |
|---|
| Shank diameter, large | 19mm |
|---|
| Slotted | No |
|---|
| Thread length Internal thread | 20mm |
|---|
| Thread Pitch | Right-hand thread |
|---|
| Thread size | M10 |
|---|
| Tilt angle | 13° |
|---|
| Total length internal thread head | 57mm |
|---|
| Width Across Flat | 17mm |
|---|
| Width inner ring | 14mm |
|---|
| Width inner ring, lower tolerance | -0,12mm |
|---|
| Width inner ring, upper tolerance | 0mm |
|---|
| Width of the rod end | 10,5mm |
|---|
| Sealing | Without |
|---|
| Length rod end shank | 6,6mm |
|---|
