1068,80 zł
brutto · 868,94 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 10mm |
|---|---|
| Średnica zewnętrzna D | 34mm |
| Szerokość B | 20mm |
| Masa | 0,098kg |
| Temperatura pracy | -30…120 °C |
| Axial runout | 5µm |
|---|---|
| Basic dynamic load rating, axial | 13 400N |
| Basic static load rating, axial | 18 800N |
| Bearing frictional torque |
|---|
| 0,12Nm |
| Bore diameter lower tolerance | -0,008mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Contact angle | 60° |
|---|
| Fatigue load limit, axial | 850N |
|---|
| Limiting speed for grease lubrication | 10 900 1/min |
|---|
| Mass moment of inertia | 0,029kg*cm² |
|---|
| Maximum diameter of housing | 28mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Minimum diameter shaft | 14mm |
|---|
| Outside diameter lower tolerance | -0,011mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Recommended INA precision locknut for radial locking | ZM10 |
|---|
| Required locknut force axial | 4 891N |
|---|
| Rib diameter inner ring | 21mm |
|---|
| Rigidity axial | 325N/µm |
|---|
| Thermally safe operating speed | 4 600 1/min |
|---|
| Tightening torque for the recommended INA precision locknut | 6Nm |
|---|
| Tilting rigidity | 25Nm/mrad |
|---|
| Tolerance class | PE |
|---|
| Width lower tolerance | -0,25mm |
|---|
| Width upper tolerance | 0mm |
|---|
| Sealing | 2RS |
|---|
