3396,90 zł
brutto · 2761,71 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 35mm |
|---|---|
| Średnica zewnętrzna D | 90mm |
| Obciążenie dynamiczne C | 26 000N |
| Obciążenie statyczne C₀ | 47 000N |
| Masa | 1,036kg |
| Koszyk | TV |
| Temperatura pracy | -30…120 °C |
| Axial runout | 1µm |
|---|---|
| Basic dynamic load rating, axial |
|---|
| 56 000N |
| Basic static load rating, axial | 148 000N |
|---|
| Bearing friction torque | 0,9Nm |
|---|
| Diameter lubrication hole | 3,2mm |
|---|
| Distance to lubrication hole | 10mm |
|---|
| Division (screwing holes) | 30° |
|---|
| Fatigue load limit, axial | 12 900N |
|---|
| Fatigue load limit, radial | 6 800N |
|---|
| Height outer ring over wave washer | 35mm |
|---|
| Hight | 54mm |
|---|
| Limiting speed for grease lubrication | 1 700 1/min |
|---|
| Limiting speed for oil lubrication | 4 800 1/min |
|---|
| Recommended INA precision locknut for radial locking (not included) | ZMA35/58 |
|---|
| Recommended INA precision locknut for axial locking (not included) | AM35/58 |
|---|
| Mass moment of inertia | 2,8kg*cm² |
|---|
| Maximum diameter of housing shoulder | 61mm |
|---|
| Minimum diameter shaft shoulder | 50mm |
|---|
| Minimum chamfer dimension | 0,6mm |
|---|
| Minimum chamfer dimension | 0,3mm |
|---|
| Number of screwing holes | 12 |
|---|
| Number of screws | 12 |
|---|
| Pitch circle diameter (holes) | 73mm |
|---|
| Position bore in the housing | 0,1mm |
|---|
| Required locknut force | 12 143N |
|---|
| Rigidity axial | 2 600N/µm |
|---|
| Rip diameter shaft washer | 60mm |
|---|
| Screw size | M6 |
|---|
| Split | 30° |
|---|
| Tightening torque nut | 40Nm |
|---|
| Tilting stiffness | 740Nm/mrad |
|---|
| Width inner ring | 11mm |
|---|
| Width, outer ring | 18mm |
|---|
