74 416,30 zł
brutto · 60 501,06 zł netto
Kupujesz na firmę? Ceny netto i progi ilościowe w Strefie Partnera.
| Średnica wewnętrzna d | 395mm |
|---|---|
| Średnica zewnętrzna D | 525mm |
| Obciążenie dynamiczne C | 121 000N |
| Obciążenie statyczne C₀ | 390 000N |
| Prędkość graniczna | 650 1/min |
| Masa | 32,2kg |
| Temperatura pracy | -30…120 °C |
| Axial rigidity of rolling element set | 23 400N/µm |
|---|
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. | 6µm |
|---|
| Axial rigidity of bearing position | 14 000N/µm |
|---|
| Basic dynamic load rating, axial | 214 000N |
|---|
| Basic static load rating, axial | 1 540 000N |
|---|
| Bore diameter lower tolerance | -0,023mm |
|---|
| Bore diameter upper tolerance | 0mm |
|---|
| Counterbore depth of fixing holes | 8,2mm |
|---|
| Counterbore diameter of fixing holes | 15mm |
|---|
| Fixing holes diameter inner ring | 9,3mm |
|---|
| Fixing holes diameter outer ring | 9,3mm |
|---|
| Height contact face outer ring | 42,5mm |
|---|
| Height contact face outerring H1 lower tolerance | -0,07mm |
|---|
| Height contact face outerring H1 upper tolerance | 0,06mm |
|---|
| Height contact face outer ring | 22,5mm |
|---|
| Height | 65mm |
|---|
| Angular measuring system integrated | MA |
|---|
| Mass moment of inertia for rotating inner ring | 8 352kg*cm² |
|---|
| Mass moment of inertia for rotating outer ring | 4 254kg*cm² |
|---|
| Maximum diameter inner ring | 487,7mm |
|---|
| Outside diameter lower tolerance | -0,028mm |
|---|
| Outside diameter upper tolerance | 0mm |
|---|
| Pitch quantity | 48 |
|---|
| Pitch separation angle | 7,5° |
|---|
| Pitch circle diameter fixing holes in inner ring | 415mm |
|---|
| Pitch circle diameter fixing holes in outer ring | 505mm |
|---|
| Quantity of fixing holes inner ring | 46 |
|---|
| Quantity of fixing holes outer ring | 45 |
|---|
| Quantity of retaining screws | 2 |
|---|
| Quantity of threaded extraction hole | 3 |
|---|
| Radial rigidity of rolling element set | 8 700N/µm |
|---|
| Radial rigidity of bearing position | 8 000N/µm |
|---|
| Screw tightening torque | 34Nm |
|---|
| Threaded extraction hole | M12 |
|---|
| Tilting rigidity of rolling element set | 582 000Nm/mrad |
|---|
| Tilting rigidity of bearing position | 351 000Nm/mrad |
|---|
| Width of outer ring | 20mm |
|---|
